Vents, Gas Appliances, Adventitious Air, Flueless, Open-flued, Room-sealed, Pipework, Sizing, Unsafe Situations, Landlord's Gas Safety Record, Electrical Cross-Bonding, Immediately Dangerous (ID), At Risk (AR), Not to Current Standards (NCS), Concern Safety, Responsibilities, Warning and Safety Notices/Records, Emergency and Warning Labels, Meter Installation, Gas Leak Detectors, CO, Leak-detection Fluid, Commissioning, Purging Volume, Tightness Test, U-Gauges, Soundness, Performance, Rate, Calorific Value (CV), Heat Input (Imperial meters), (Metric meters), Working Pressure, Meter Emergency Control Valve ECV, Regulator, Pipework, Fittings, Chimney and Flue, Liner, Pre-cast Concrete Blocks, Catchment Space, Fire Stop Plate, Clay Blocks, Combustion, Carbon Monoxide Poisoning, Calorific Value, Analysers, Thermostats, Flame Supervision Devices FSD, Vitiation Sensing VSD, Multifunctional, Solenoid Valve, Zero Governor
mob
07898 737 837
tel
0208 001 5260
Home
Services
Plumbing
Boiler Repairs
Pulsacoil Repairs
Shower Repairs
Extra
Plumbing Pages
Principles
Processes
Cold Water
Hot Water
Heating
Electrics
Lead
Sanitation
Unvented
Maintenance
Work Relations
Environment
Gas Safety
Gas Appliances
System Planning
News
Tax Calculator
About Us
Vaillant Products
Reviews
Portfolio
Vacancies
Terms and Conditions
Disclaimer
Contacts
Get a quote
Offers
New Boilers
Gas Check +
Powerflush
Loading
Gas Safety
Exam revision materials for Plumbing Level 2&3 and ACS Gas Safety test
Create an Article
Pipework
Open-vented System
Click to show/hide index
Regulations
Acts
Health and Safety at Work etc Act 1974 (HSWA)
Example
Code of Practice
Approved codes of practice (ACoPs)
Guidance
Guidance issued by the HSE
Standards
British Standards, IGEM documents
Gas Supply
Gas Meters
Gas rating Landis+Gyr electronic meters
Gas Rating Secure Meters (UK) Liberty EG4v 10 Smart Meter
Gas rating Elster BK G4E
Regulations
Meter Types
Meter Emergency Control Valve ECV
Gas Meter Installation
Gas Meter Regulator
Safety Devices and Controls
Air/Gas ratio valves
Servicing
Gas valve replacement
Summary
Commissioning
Air/gas ratio adjustment
Offset adjustment
Use of an electronic portable combustion gas analyser (ECGA)
Gas valve adjustments
Operation of Modern Gas Valves
Introduction
Appliances Controls
Ignition Devices
Appliances Thermostats
Flame Supervision Devices FSD
Thermal FSD
Electronic FSD
Vitiation Sensing Device (VSD)
Gas Controls
Gas Controls
Gas Meter Controls
Emergency Control Valve ECV
Medium to Low Pressure Governor (Regulator)
Safety Cut-off Devices
Multifunctional Control Valve
Gas Tap
Safety Cut-off Valve
Solenoid Valve
Zero Governor
Gas Relay Valve
Spare Part Identification
Manufacturer's Instruction
Pipework
Open-vented System
Cold Feed Pipe
Ventilation
Gas Appliances
Adventitious Ventilation
Air Vents
Vents in Series
Vents for Flueless Appliances
Vents for Open-flued Appliances
Vents for Room-sealed Appliances
Gas Pipework Ventilation
Ventilation Sizing
Single Appliance in a Room
Unsafe Situations
Dealing with Unsafe Situations
Landlord's Gas Safety Record
Domestic Gas Safety Inspection Report
Electrical Cross-Bonding Record
Immediately Dangerous (ID)
At Risk (AR)
Not to Current Standards (NCS)
Concern for Safety
Responsibilities
Warning and Safety Notices/Records
Emergency Notices and Warning Labels
Warning Labels
Meter Installation and Control Labels
Gas Leak
Gas Leak Detectors
CO Detectors
Leak-detection Fluid
Regulations
Documents
Reportable Cases
Commissioning
Purging
Purging Volume
When to carry out?
Tightness Test
Regulations
When to carry out?
Pressure Gauges
Soundness Test Procedure
Gas Performance
Gas Rate
Gas Rate Check
Calorific Value (CV)
Heat Input
Heat Input for an Appliance (Imperial meters)
Heat Input for an Appliance (Metric meters)
Working Pressure Test
Gas Pipework
Gas Fittings and Pipes
Gas Fittings
Pliable Corrugated Tubing (PCT)
Gas Supply
Via Protected Shaft
Materials
Pipes
New Installation
Gas Installation Types
Underfloor installation
Equipotential Bonding
Exterior Pipework
Pipe Protection
Support and Insulation
Pipework Sizing
Volume of a Gas Pipework
Chimney and Flue
Chimneys
Chimneys
Unlined Chimney
Solid Fuel Chimneys
Flue Construction
Twin-wall Metal Flues
Vitreous Enamelled
Flexible Stainless-steel Flue Liner
Pre-cast Concrete Blocks
Catchment Space
Flue Gas Collector Box
Flue Height Calculation
Fire Stop Plate
Flue Inspection and Testing
Flue Inspection and Testing
Flue Terminals
Terminal Types
Flue Termination Clearance Distances
Clay Blocks
Flue Types
Flue Categories
Open-flued Systems
Room-sealed Flue Systems
Shared Flues
Combustion
Carbon Monoxide Poisoning
Saturation of Haemoglobin with CO
Volume of CO in the Air
Carbon Monoxide Alarm
Combustion Process
Combustion Process
Complete Combustion
Incomplete Combustion
Air Requirements for Combustion
Flames and Burners
Natural Gas
Constituents of Natural Gas
Calorific Value
Wobbe Number
Gas Families
Portable Combustion Gas Flue Analysers
Electronic Gas Flue Analyser
Gas Analyser Preparation and Use
Combustion Performance (CO/CO2 ratio) Action Levels
Boilers
Components and Safety Devices
Diverter Valve Working Principle
Cold Feed Pipe
MIN
size is
15mm
No
valves on the pipe
Close Couple -
150mm MAX
between cold feed pipe and open vent
pipe
< Go Back
2013-04-19